Get matched with top dryer vent cleaners in Lordsburg, NM

If your dryer is wet inside, it could be due to a poorly designed ventilation system. This happens more frequently during the hotter months as heat is trapped inside the vent duct. Broken or failing seams and seals on the vent pipe can also allow warm air to enter. If changing the ventilation is not an option, consider insulating your vent pipes to reduce moisture capturing.

Yes, you can snake a roof vent. This is one of the best ways to clear a problematic clog in a plumbing vent. You can either snake the vent by climbing on the roof and sending the plumber’s snake or auger directly down the vent opening, or you can cut a hole in the vent from inside the attic and snake it from there.

According to the National Fire Protection Association, dryers and washing machines cause over 15,000 fires a year, with dryers causing about 92 percent of those fires. Because dryer fires are more common than you might think, it’s important to clear the lint trap regularly and have annual dryer vent cleanings.

Your dryer vent hose should be as straight as you can possibly get it. A straight vent means less lint buildup in the hose. If the hose has a lot of bends and turns, it’s much easier and much more likely for lint to get stuck along the line, meaning you’ll have to clean it out a lot more often to decrease the risk of a total blockage or a fire.