Best sink repair pros near La Cienga, NM

Older faucet fixtures may have some corrosion, leaving them stuck. Try a few techniques to loosen the fixtures.

• Wrap the fixture with a towel and tap the base with a hammer.

• Use a putty knife to gently remove any caulk that may be holding the handle or fixture in place.

• Apply a few drops of penetrating oil around the base of the fixture or around the nuts.

• Purchase a faucet pulling tool to pop the fixture loose.

The time it takes to install a sink depends on whether you hire a professional or do it yourself, as well as the complexity of the job. A professional plumber can typically install a sink in 1 to 4 hours, with most routine jobs taking around 1 to 2 hours. However, more complicated installations will take longer. Projects that involve rerouting plumbing, installing an under-mount sink, or making countertop modifications can take a full day. Installing a sink with a prefab vanity could also stretch the project to 6 to 8 hours. If you plan to install the sink yourself, you should set aside 4 to 6 hours, though it could take longer. It's also recommended to have a friend help, especially if you are working with a heavy sink made of a material like porcelain.

Yes, a dripping faucet can increase your water bill. Leaking faucets use up more water than you’d think. According to the Environmental Protection Agency, a faucet that drips once per second can waste more than 3,000 gallons of water per year. If you have more than one dripping faucet, your water bill can increase even further. 

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.