Get matched with top aquarium service pros in Fort Defiance, NM

To break down fat in a septic tank, you will need to hire a professional septic tank cleaner near you to either pump the septic tank or use a shock treatment to clear the clog. It’s important to not pour fat, oil, or grease (memorable with the helpful acronym FOG) down your drains because they can clog the septic system. Instead, you can dispose of them with regular trash, or if your household produces a lot of FOG waste, you may want to install a grease trap for your plumbing.

There are three layers of wastewater in a septic tank: scum (solid waste that floats to the top of the wastewater), liquid (the relatively clean liquid wastewater in between the two other layers), and sludge (solid waste that falls to the bottom of the wastewater). The buildup of sludge is one of the main reasons septic tanks need to be pumped. If the tank is more than 1/3 of the way full with a combination of sludge and scum, it’s time to call a pro for pumping.

It depends on several factors, such as the equipment used and the company. However, it takes about 20 to 30 minutes to pump an average-size septic tank of 1,000 gallons. A larger tank that is over 1,500 gallons can take up to an hour to pump as long as there are no complications. 

Septic tanks appear full after pumping because the liquid levels have returned to normal. If you can see the pipe, the tank is empty. However, heavy rain can cause septic tanks to fill faster than normal. You might also have leaky pipes or faucets, causing extra water to drip down the drains and into the septic tank.