Top-rated fence painters.

Get matched with top fence painters in Bernalillo, NM

Enter your zip and get matched with up to 5 pros

Need a pro for your fence painting project in Bernalillo, NM?

Select your specific project to find the pro for you.

TRUSTED BY BERNALILLO, NM HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon559
    Verified fence painting services reviews

Find Fence painters in Bernalillo

No results for Fence painter in

Try adjusting your search criteria.
Fence Painting questions, answered by experts

The best way to prepare your vinyl fence for a paint job is to clean it with warm, soapy water and rinse it with a hose or pressure washer on a low setting. Be sure to let it totally dry, then sand the surface before applying an epoxy-based primer. After the primer, you're ready to paint your vinyl fence.

Stains penetrate wood best when it's cool and dry, so you want to avoid moisture. If the wood is wet upon application, or if it rains before the stain dries, the water will soak into the wood and displace the staining solution. This leads to a flaky and blotchy look, which is the opposite of a sumptuous even coat. Once the stain has fully cured, after about 3 days, rain shouldn’t cause you any problems.

If you paint a vinyl fence, it will likely stick to it for only a brief amount of time. This is because vinyl is not a porous material, so it's not an ideal surface for holding paint. Initially, paint will stick to your fence, but it will eventually peel off. Applying primer before painting your vinyl fence will help paint last longer. Certain primers are well-suited to vinyl, which means you can paint vinyl siding with the proper preparation.

The general consensus is that two coats of stain are required and since the cedar is siding, a third coat of sealant is always a good idea. This helps protect the wood and stain, so you won’t need to resand and restain for at least a decade. Each stain after the first will darken the wood, so be aware of that when choosing a colored stain.

For the best results, you should apply two coats of paint to your wrought iron fence. Let your first coat dry for about an hour then promptly apply your second coat.

The Bernalillo, NM homeowners’ guide to fence painting services

From average costs to expert advice, get all the answers you need to get your job done.