Get matched with top well and pump technicians in Agua Fria, NM

Yes, you can shock a well yourself, but it can be dangerous if you don’t know what you’re doing. We recommend calling a pro, but if you decide to do it yourself, make sure to follow proper safety precautions. This means wearing the correct safety gear, such as rubber gloves, goggles, and boots. You should also mix the chlorine solution in an open area with plenty of ventilation. Also, make sure not to drink or use the water for a few days afterward, until you’ve flushed the system and retested the water.

Hire a local well and pump pro for all well-related issues. This type of professional can inspect your well, pump, and tank, suggest repairs, and fix your well fast. They can also coordinate a water quality test if you’re concerned about the health of your well water. Find a vetted well and pump pro in your area to get your water ship-shape.

The precharged pressure tank should start at around 28 psi. The two pressure settings of note are the cut-in and cut-out pressure. The well pump starts when the tank reaches the minimum cut-in pressure. It turns off when the tank reaches the maximum cut-out pressure. The desired water pressure in the household is usually a few psi above the cut-in number. The difference between the cut-in and cut-out pressure settings should be 20 psi. Typical settings for household applications include 20/40, 30/50, and 40/60.

It’s possible to fix a broken well pump yourself, but we don’t recommend it. Well pumps are hard to reach and service without the proper equipment, and even if you can reach the pump, it involves working in close proximity to water and electricity, which can be extremely dangerous. Any mistakes made during the repair process could contaminate your water supply or put you and your home at risk. Additionally, some states require that a licensed plumber carry out well pump repair. It’s worth it to hire a professional water pump repair service.