Get matched with top roofers in Aberdeen, NJ

It’s possible to walk on a clay tile roof, but you run the risk of breaking or cracking the tiles if you’re not careful, so it’s best not to walk on it if you can avoid it. If you or a contractor needs roof access, be sure to distribute your weight evenly and step on the portions of tile that are also supported underneath, which depends on your tile design. Walking on any roofing material is inherently dangerous, so wear rubber-soled shoes and use safety equipment if you need to access your roof.

You shouldn’t put a new roof underlayment over an old one for a few reasons. Old felt must be removed in order to assess the condition of your roof decking, such as rotting wood or other structural issues. Also, if your roofer doesn't install a fresh layer of felt as is required by shingle manufacturers, your warranty may be voided. Finally, old underlayment removal is often included in the cost of roof repair or replacement, so there's no real benefit to leaving it on before installing a new layer.

You should plan on waiting as long as it takes for the roof deck to dry out completely if it gets wet. In most cases, this will take about 24 hours, but it could take longer if you have shading on your roof or cloudy weather after the rainfall that prevents the sun from drying the material.

Metal roofs do not inherently leak more than shingle roofs; when properly installed, they are generally less likely to leak. Asphalt shingle roofs are more susceptible to leaks due to factors like wind uplift, damage from extreme weather, moss growth, and ice dams. Over time, asphalt shingles also lose their protective grit, which reduces their waterproofing capabilities. In contrast, metal is a more resilient material that stands up better to heavy precipitation and high winds. However, metal roofs can develop leaks if they are poorly installed, have improperly sealed fasteners, or experience issues from thermal expansion. For this reason, professional installation and regular maintenance are crucial to ensure a metal roof's longevity and superior protection against leaks.