Get matched with top roofers in Lincroft, NJ

A roof replacement can take anywhere from one to 14 days. For most homes, a full replacement that includes tearing off old materials takes about one to two days, though the average project can last up to 12 days. The exact timeline depends on several factors, including the roof's size and complexity, the type of roofing material, the crew size, and weather conditions. Certain materials take longer to install; for example, metal roofs can take seven to 14 days because the material is more difficult to work with than asphalt shingles, wood, or tile. A re-roofing project, where new shingles are installed over old ones, can take half the time or less. It's also important to factor in the time needed to obtain necessary permits. A professional roofing contractor will typically complete the job faster than a DIY approach.

The number of roof vents necessary for a 2,000-square-foot house depends on several factors. The calculation depends on the net free area within the attic and whether your municipality requires a 1/150 or a 1/300 ratio of venting square feet to attic square feet. If you install vents with a square-foot opening of one, you'll need either 14 or seven exhaust vents and an equal square-foot amount of intake vents.

When installed and maintained properly, a cedar shake roof should last up to 60 years. Severe weather and high winds will damage your roof, reducing its life span. Expect a shorter life span if the roofer didn't use top-grade material, didn’t have cedar shake expertise, didn’t create the proper ventilation, or didn’t use the correct fasteners. Keeping up with maintenance will help it last longer. It’s also a good idea to get roof inspections on a regular basis to help spot repairs before they become major issues.

Asphalt shingles blister when air gets trapped between building materials, either within the layers of the shingle itself or in adhesives on the undersides of the shingles. As the roof heats up in direct sunlight, the trapped gas expands and creates a bubble in the roof. Eventually, the bubble can pop, leaving an exposed area of decking and underlayment.