Get matched with top deck staining pros in Wilton, NH

Eggshell and satin finishes are best for porches because they sit in the sweet spot between scuffable matte and distracting high gloss. Your porch sees a fair amount of wear and tear, so you don’t want paint that’ll show every mark like matte, but you don’t want to be blinded by glossy paint in the sun either. Eggshell and satin have durability and a look that sits nicely in the middle.

Yes, you must thoroughly clean your deck before staining. If you don't, dirt, debris, grease, and mildew can get trapped between the wood and the new stain. This not only looks unsightly but also prevents the stain from penetrating the wood properly, reducing its ability to protect the deck from weather and UV rays. As a result, the stain won't last as long or look as good. Any existing mold or mildew left untreated can continue to grow beneath the new stain, potentially leading to wood rot and structural damage. Always wait at least 48 hours after cleaning for the wood to dry completely before applying stain.

For the longest-lasting exterior paint, consider acrylic or enamel (oil-based) paints. Acrylic paints, including acrylic latex and acrylic enamel, are known for withstanding harsh weather and sun exposure. Enamel-based paints are also one of the most durable options available. While latex paint is common, it typically has a shorter lifespan than acrylic or oil-based options. The paint's finish also affects its durability; a higher gloss finish is generally more durable. For resistance to moisture and cracking, matte and satin finishes can be effective, while a high-gloss acrylic or oil-based paint offers a combination of maximum longevity and durability.

Yes, it is generally a very good idea to seal your deck after pressure washing. Power washing removes not only dirt and debris but also a thin layer of wood, leaving the surface exposed and more susceptible to weathering. Sealing is almost always needed after this process. After a general cleaning, sealing isn't automatically necessary if the existing sealant is still intact. You can test the surface by placing a few drops of water on it. If the water beads up, the sealant is working. If it soaks into the wood, it's time to apply a new sealant. If it has been a few years, it's wise to remove the old sealant, wash the deck, and reseal for maximum protection.