Get matched with top chimney repair specialists in Scribner, NE

It is often worthwhile to refinish or restore furniture, especially for high-quality, older, antique, or sentimental pieces. Older furniture tends to have better durability than modern, mass-produced items, and refinishing can cost about one-third of the price of replacement. To determine if it's cost-effective, compare quotes from local refinishing services with the price of a new, similar piece. Refinishing can refresh a piece's look and extend its lifespan. However, it may not be worth it for newer furniture made of medium-density fiberboard (MDF) or plywood, or for items with major structural damage. A professional can help you assess the piece and decide on the best course of action.

Yes, you can fill rotten wood with expanding foam. You may prefer using an expanding foam treatment instead of wood filler since the latter can take a long time to dry. It may also provide an easier solution when you’re dealing with smaller gaps. If you use expanding foam, allow it to cure for about 24 hours before you sand and prime it.

If carpet installers damage your items during the furniture removal process, promptly notify the company and document the damage with photos and descriptions. The company should have a protocol in place to address such situations, potentially offering repair, replacement, or compensation. Maintain open communication throughout the resolution process to ensure a satisfactory outcome for both parties.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.