Get matched with top fencing pros in Ravenna, NE

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

You can sometimes install a fence over a gas line. Fence installation typically requires a two-foot depth for posts, so if the lines are shallower than two feet, you cannot put a fence post over the line. You’ll need to call 811 to get the gas lines located and marked before you start the project.

Snow fences work well when they are correctly installed. This snow tool disrupts the wind flow and reduces the amount of snowdrift in specific areas, such as roads, walkways, and buildings. Of course, the effectiveness of the snow fence depends on various factors, such as fence type, height, and wind patterns.

Posts for a horizontal fence should be no more than 6 feet apart. Wood pickets are not as strong when mounted horizontally as when mounted vertically. As such, the fence panels on a horizontal fence can’t cover the same span between posts as a vertical fence can. If you install the posts further apart on a horizontal fence, the fence will lose stability, making the boards more likely to sag.