Get matched with top sink installation pros in Mitchell, NE

Deteriorated seals, O-rings, or gaskets are common culprits behind a leaky sink after you’ve turned off the water—especially if your sink is older than 15 years. Inspect each of these mechanisms in your sink for signs of corrosion or looseness, then replace the worn-out part to fix it. Older sinks may be worth replacing if several of the parts are worn-out.

Porcelain and enamel sinks have very similar appearances, but they aren’t the same. Porcelain is a ceramic made from natural clay, while enamel is a strong powder that’s glazed over a metal sink. Use a magnet to determine whether you have an enamel or porcelain sink. If a strong magnet sticks to the sink, it’s likely enamel. If it doesn’t, you probably have a porcelain sink. You can also use the model number on the sink (often found on the underside of the bowl) or information from the manufacturer to determine the material.

When installing an undermount kitchen sink in a granite countertop, use 100% silicone to secure the basin. If you’re worried your sink is too heavy, speak with a countertop professional about how to adhere the sink to the countertop without worrying about issues down the road. Sagging undermount sinks can be a common plumbing problem if they’re not properly adhered, so always make sure you’re using a high-quality material.

Natural stone stinks require sealing before installation because they have a porous surface susceptible to staining and damage. Quartz is much denser than natural stone, making it non-porous and resistant to stains or absorption. Because quartz is a composite material, it doesn’t need to be sealed before daily use.