Best toilet pros near Burwell, NE

A running toilet is not a plumbing emergency, but you will want to try some DIY fixes or call in a plumber to prevent wasting gallons of water. The three most common causes of a running toilet are a broken or dirty flapper, an incorrectly sized chain between the flush lever and flapper, or a float that is out of position.

Generally, toilet leaking is not an emergency unless the leakage is severe. However, any leakage at the bottom should be addressed as soon as possible because it could lead to water damage to the floors, under the tiles, or into the walls. Leaks at the bottom can also lead to mold growth if unaddressed.

The average cost to replace a toilet seal ring is around $50 to $200 if you hire a pro to do the job. If you do it yourself, you’ll only need to pay for the supplies. Wax rings alone cost anywhere from $5 to $25 at hardware stores and can save you a lot of money compared to having a professional installation. At the same time, a licensed plumber knows how to properly install your new wax ring to prevent premature issues down the line.

To drain a broken toilet, place towels or plastic sheeting around the base in case of splashing or overflowing. Next, shut off the toilet’s water supply, usually via a valve on the wall behind the toilet. Begin flushing the handle to remove as much water as possible from the tank and the bowl. Don’t flush the toilet if it’s clogged, though. From there, use a large sponge to soak up any remaining water and wring it over a bucket.