Get matched with top garage pros in Williston, ND

The amount of paint needed to cover a two-car garage floor depends on the surface area and the product's coverage rate. On average, a standard two-car garage floor measures 400 to 500 square feet. Coverage ranges from 100 to 200 square feet per gallon for epoxy paint, depending on the product and application method. After some quick math, you may need 2 to 5 gallons of epoxy paint with two coats to cover a two-car garage floor. 

If you plan on heating your garage, you must install a vapor barrier when drywalling the garage. A vapor barrier protects your garage from frost and mold that can occur through condensation. If your garage is unheated, you don't need to install a vapor barrier. The only exception is if you regularly crank the heat in your car before getting in it. In this case, you may still want to install a vapor barrier, as your car can heat your garage.

Wood, steel, fiberglass, and aluminum are among the top building materials for a garage. Wood is highly customizable, naturally insulative, and durable in mild climates but can be expensive. Steel is lightweight, low-maintenance, and cost-effective, but it’s susceptible to rust. Fiberglass is low-maintenance and doesn’t shrink or expand in changing temperatures, but it can become brittle and crack from prolonged high winds and sun exposure.

Unlike steel, aluminum isn’t susceptible to rust and is low-maintenance, but its ultra-light weight makes it less durable than some materials, and it’s susceptible to saltwater damage, making it a poor choice for coastal homes.

Garage door sensors should be installed on each side of the door, typically six inches off of the ground. The sensors communicate through an infrared beam, so they need to face each other directly for the system to work properly. Make sure they’re level and aligned, and keep the area around them clear. If they’re too high or out of alignment, your garage door won’t function properly.