Get matched with top epoxy flooring pros in Midland, NC

Resurfacing a garage floor takes about eight hours on average, with another couple hours over three days to do the epoxy. Epoxy goes on in three coats, with each coat taking 24 hours to dry and cure. You’ll need to keep foot and vehicle traffic off of your garage floor for around 4 days in total when replacing your garage floor, so be sure to plan ahead before you start. This is a great time to organize your garage since you’ll need to move everything out to apply the epoxy.

Whether it's better to stain or paint concrete depends on your budget, desired aesthetic, and DIY skill level. Generally, staining is a more durable option because the stain soaks into the concrete's surface and won't wear away like a topical paint coating. Painting concrete can trap moisture underneath the paint layer, which may cause the concrete to deteriorate over time. However, concrete paint offers a wider variety of colors, is typically easier and less expensive to apply, and is effective at covering up existing stains or blemishes on the surface.

Sealing resurfaced concrete is not an absolute necessity. However, it is recommended, and in most cases, a high-quality concrete sealer can protect the surface from stains as well as water penetration, extending the life of the resurfacing material. Some sealers are formulated to protect pigments from fading due to UV exposure. Sealer tends to enhance the colors in decorative resurfacing applications, making them more vibrant and richer compared to the duller, more faded appearance of concrete colors without sealer.

Unlike staining concrete, painting concrete often results in chips and peeling over time. You can expect numerous touchups over the years if the concrete is in a high-traffic area. Since concrete paints are opaque, you may also find it more difficult to get the exact color results you want. Lastly, painting concrete can make it much more slippery unless you mix in an additive for traction.