Top-rated radon detection and reduction specialists.

Get matched with top radon detection and reduction specialists in Hubert, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your radon detection and reduction project in Hubert, NC?

Select your specific project to find the pro for you.

Find Radon detection and reduction specialists in Hubert

Avatar for Elite Home Inspections, LLC
Elite Home Inspections, LLC
5.0(
14
)
Radon Gas - Testing

Serving Hubert, NC and surrounding areas

Approved

In business since 2025

Free estimates

Small jobs welcome

"April helped us line up a last minute inspection for a new build for us. They were extremely thorough and found a few significant problems that we were able to take to the builder. They included lots of photos of the issues which was helpful. They used thermal imaging too which was new to us but helps detect problems that may not have been seen otherwise. We got our report along with a summary the next day and had excellent communication and follow through. We will definitely use them in the future and highly recommend."
5 neighbors recently requested a quote
Radon Detection and Reduction questions, answered by experts

Radon is present almost everywhere but, like sunlight, the concentration levels and how often you are exposed to it have a large part to play in just how dangerous it is. There are levels of radon that are acceptable inside a house, but above a certain limit, radon becomes a serious radioactive hazard that is a known cause of lung cancer. In fact, radon exposure is the number two leading cause of lung cancer (after smoking).

No level of radon is technically safe, but since it is naturally present everywhere, it is impossible to avoid entirely. The average radon level in homes across the United States is 1.3 picocuries per liter (pCi/L). The Environmental Protection Agency (EPA) recommends taking action to reduce radon levels if your home's test results are between 2 and 4 pCi/L or higher.

A homeowner can install a radon mitigation system on their own. But it’s a challenging DIY that requires a lot of knowledge about radon mitigation as well as familiarity with local regulations. You do not want to risk an improper installation that leaves the system unable to detect radon or gives it a shortened life span. Relying on a professional is the surest way to guarantee a successful installation.

The cost to replace a radon fan ranges from $300 to $600 for the fan itself, with installation adding an additional $200 to $500. Overall, the total cost for replacement can range from $500 to $1,100, depending on factors such as the fan model, home size, and local labor rates. If the fan is part of a larger radon mitigation system, the price may be higher.

You'll need to test your home for radon after installing the mitigation system, then again every two years. If radon remains elevated, contact a licensed radon professional, either the contractor who installed the system or a different one, and have them evaluate the system. They may need to make some changes to improve its effectiveness and performance.

The Hubert, NC homeowners’ guide to radon detection and reduction services

From average costs to expert advice, get all the answers you need to get your job done.