Get matched with top marble restoration pros in Bostic, NC

Quartzite countertops are porous, meaning that liquids can seep into the stone and stain them. You’ll need to seal them before installing and resealing annually, depending on use and stone material. Sealing will help prevent stains and etching. On the other hand, you don’t need to seal quartz and other engineered stone countertops since they aren’t porous.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Engineered stone is nonporous, unlike natural stone, and does not need to be sealed. You do not have to worry about etching or bacterial growth. It is more durable than natural stone and concrete, as well as highly heat resistant. Engineered stone is easy to clean and maintain. You can wipe it down with warm water and soap. Use a non-scratch scrub pad for stains and avoid any harsh cleaners. Engineered stone can even be eco-friendly, with some manufacturers using waste byproducts or organic resins.

Quartz countertops are known for their durability, but they aren’t indestructible. Quartz countertops can crack under extreme pressure, like when experiencing a heavy impact. The same can happen with regular exposure to high temperatures. Finally, improper installation makes the quartz more vulnerable.