Get matched with top toilet pros in Atkinson, NC

Snaking a toilet is similar to clearing sinks and bathtubs, but there are unique circumstances where you’d have to drain, disassemble, and remove the toilet to fix the clog. For stubborn clogs in the toilet trap, a toilet auger—designed with a shorter cable and a protective plastic encasing—can navigate the tight bends and clear the clog without risking damage to the porcelain. 

Yes, frozen pipes can prevent a toilet from working correctly. If the pipes are frozen, water cannot flow, which means your toilet tank won't be able to refill after a flush. This will prevent the toilet from flushing again. Depending on which lines are frozen, the ice can also block the drain pipe, preventing water from flushing away.

As a temporary workaround, you can manually add water to the tank for each flush. To clear a frozen drain pipe, you can try filling the toilet bowl or tank with warm water and flushing to help thaw the ice. However, the best long-term solution is to unfreeze the pipes to get your toilet back in working order.

If you don’t replace a toilet flapper, your toilet tank will continue to empty and fill repeatedly, wasting water and running up your utility bills. Checking the flapper is a good first guess when dealing with a constantly running toilet. However, if these problems continue after replacing the flapper, you may need to hire a plumber to check and fix any bigger problems. 

If you’ve accessed the bolts and nuts that hold your toilet seat in place and can’t unscrew them, it’s possible that they were overtightened or that the material corroded over time, making it impossible to unscrew. If that’s the case, you can either call in a plumber for help, or you can DIY a solution if you’re careful. Lay down masking tape around the mounting bracket and then use the tape as a surface to lay a hack saw blade. Move slowly to cut through the bracket and bolt, being careful not to damage the porcelain in the process.