Get matched with top sink installation pros in Plains, MT

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.

Yes. You can replace just the stopper portion with a universal sink stopper. All you need to do is open up the existing stopper and pull it up from the drain. You should be able to remove and replace the stopper with bare hands. If the existing stopper seems to be stuck, use a pair of pliers to remove it.

Deteriorated seals, O-rings, or gaskets are common culprits behind a leaky sink after you’ve turned off the water—especially if your sink is older than 15 years. Inspect each of these mechanisms in your sink for signs of corrosion or looseness, then replace the worn-out part to fix it. Older sinks may be worth replacing if several of the parts are worn-out.

The standard kitchen sink size is typically 22 inches by 30 inches. However, kitchen sinks are available in a wide range of sizes to fit different kitchens, commonly from 25 to 39 inches long, though you can find even larger or custom sizes. When choosing a replacement, the easiest option is to select a sink that matches your existing one's dimensions. If you decide to install a larger sink, you will need to enlarge the cutout in your countertop; be sure to use the template that comes with the new sink to ensure a proper fit. Installing a smaller sink can be more complex, as it may require replacing the entire countertop.