One of the many benefits of a pressure-assist toilet is how long it lasts. You can expect a well-maintained one to last up to 30 years. That's five years longer than a standard gravity-fed toilet, so it can be a worthwhile investment if you’re willing to spend more on your toilet installation.

Flushing the toilet only to realize it’s clogged can cause anxiety. To avoid a clogged toilet, use less toilet paper. If you notice that the toilet is flushing and refilling slower than usual, you can use a plunger to clear clogs in the S-trap. If that doesn’t work, call a plumber to check your system and possibly clear the drain lines.

You can tell if your toilet fill valve is full by removing the lid and taking a look. When you flush the toilet, the float is at the bottom of the tank, the water empties, and the fill valve opens. The float rises to the top as the tank fills again with water. When the float rises to the right level, the fill valve closes; if the valve is too high, your toilet may only partially flush, requiring you to adjust the float. 

When working on your bathroom floor tiling, you should always tile the floor first and then refit the toilet afterward. This has both practical and visual advantages—the tile will have a better seal, and the installation will look cleaner.

On the other hand, when you try to cut the tiles to fit around the toilet, you’re putting yourself at a disadvantage. It’s a lot more work, it’s hard to be precise, and mistakes or miscalculations can lead to future moisture damage to the tiling, grout, and subfloor.