Get matched with top pre-made cabinet pros in Sledge, MS

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

To install cabinet doors evenly, it’s important to make sure that all drilled holes and hardware are in their right places and aligned properly. You can achieve the ideal placement by using a level, straightedge, or other measuring tool. In the event that your cabinet doors are not installed evenly, most hinges allow you to adjust them so that your doors can be perfectly lined up. 

Some municipalities require permits for wall-mounted furniture installations, particularly when structural modifications are necessary. Always make sure to check local building codes before starting your Murphy bed installation project. Your Murphy bed installer will be familiar with local codes and handle the permitting process, ensuring your project complies with all relevant regulations.

Kitchen cabinets can hold a whopping 500 pounds, but that is only possible if you attach them correctly. They must be anchored securely with long screws driven straight into the wall studs for solid support. Depending on your cabinets and the installer, some upper cabinets use specialized hanging systems or brackets for extra reinforcement, ensuring they stay put no matter how full they get.