Get matched with top drain cleaners in Pearl, MS

Start by unscrewing the overflow valve, which is located on the wall of your tub between the floor drain and the tub spout. Gently insert a plumbing snake down into the pipe, move it back and forth, and pull it out. Remove any hair, debris, and soap scum that comes out with it. Repeat the process until the snake comes out clean, and then reinstall the cap on your overflow valve.

While some chemical drain cleaners with hydrochloric acid can dissolve hair, this method is not recommended as it can also destroy your plumbing pipes. A common DIY alternative is using baking soda and vinegar, which can help break down the clog but will not actually dissolve the hair. The best and safest method for clearing a hair clog is to remove it manually. You can use a drain snake, a straightened wire hanger with pliers to fish out the clog, or have a plumber use a professional auger for more severe blockages.

As a general rule of thumb, it’s best to clean your linear drain every two to three months to prevent debris buildup. However, if you notice it draining slowly or an odor from your drainpipes, it’s best to clear the clogged drain and maintain it more often. If you let a clog go for too long, you may have to invest in the price of professional shower drain cleaning, which costs about $225.

If methods like hot water or a plunger don’t work on your clogged drain, you can snake your drain to dislodge the plug. This can be a messy process, taking some physical effort and additional time over the other drain-clearing options. You can purchase a drain snake at a hardware store and choose from handheld options or those attached to a drill. Just work slowly, and be ready to call a plumber if you’re unable to reach the clog from your drain or P-trap.