Get matched with top plumbing handymen in Nesbit, MS

Yes, pressure-assist toilets leak, but less often than regular toilets. You might experience leaks from your toilet due to worn-out parts, water pressure in your plumbing that’s too high or low, poor installation, or cracks in your tank. These toilets are harder to fix on your own than gravity-fed ones, so it’s best to call a plumber if you can’t figure out what’s wrong, 

There are a few reasons your snake won’t go down the floor drain. One common reason is a large obstruction in the drain that is causing a blockage. You can remove any debris you see in the drain before trying to snake it. In addition, the snake might not be long enough to reach the clog, or it might be the wrong diameter. 

A standard toilet flange should fit snugly into the outflow pipe and sit level with the subfloor. Installing a new one without first removing the old one will make it impossible to form a seal and keep the toilet bowl bolted securely in place. 

However, if you’re dealing with leakage or wobbling because you’ve installed a new type of bathroom tile (making the floor taller), you may be able to avoid fully replacing the flange by opting for a toilet flange extender. Extenders typically come in kits for easy DIY installation, fit over the existing flange, and bring the drain connection higher.

A bit of water in the bowl can help unclog a toilet, especially if you're using a plunger. However, if the bowl is full to the brim, you'll need to strap on gloves and remove some of the wastewater in a cup or container so it doesn't overflow when you try to unblock the pipe. If you're concerned about it filling further, manually close the flapper in the toilet tank or turn off the water supply to the toilet.