Get matched with top plumbers in Diberville, MS

A shower cartridge is a component located inside the shower valve. While the terms are sometimes used interchangeably, they are two different parts. The shower valve is the entire device that regulates the flow and temperature of water in your shower. The cartridge is the inner part of the valve that connects to the shower controls, allowing you to adjust the water's temperature and flow by balancing the mix of hot and cold water. While the signs of a failing valve and cartridge can be similar, if you are experiencing issues with water temperature, you may need to replace the entire valve.

You should check water pressure twice a year to ensure there aren’t any irregularities and that it isn’t too high. It’s also smart to check it any time you notice symptoms of high water pressure (like banging pipes, inconsistent water flow, and leaky fixtures). Similarly, if you live in an area that’s prone to water pressure fluctuations due to municipal supply changes, elevation, or seasonal temperature shifts, check it more frequently. You can buy an affordable water pressure gauge and check the water pressure yourself.

Where you drain a hot tub largely depends on local regulations, but you must not drain chemically treated water where it can damage the environment. Direct the water toward a sanitary sewer drain that will take it to a treatment facility. If your lawn has a dedicated drainage area that’s free from plants and foundations, you can likely drain it there. Avoid storm drains, as the hot tub water will enter waterways and could hurt aquatic life. Likewise, do not pour it out directly on any public land or where it can get into your neighbors’ property. 

The normal water level in a toilet bowl is about halfway full. The water should sit above the P trap drain because this creates a seal and suction. When you flush the toilet, the suction keeps sewer gases from entering your house through your toilet. Anytime the water level is higher or lower than half full, you need to make adjustments or replace broken parts.