Billy Owens is an Industrial Controls graduate from JCCC, has a masters in mechanical & founded our heating & cooling business in May of 2006. After working in the controls industry for 18 years Billy spent some time planning and constructing his own business. He was so enthralled with the process and end result that he decided to do heating & cooling full time. Since then Billy has provided residential, commercial and refrigeration services.\n\nWe professionally install, service and repair HVAC systems. Give us a call today.
"Everything went really smoothly. The acrylic product they use is of high quality. We had some concerns about our tub walls being a little spongy due to water demand, but they reinforced everything. The job was done in one day as promised. The end result as far as appearance exceed my expectations."
"We bought a house recently. The inspection report called for installation of an expansion tank and lengthened drip leg on the HW heater. Jamison Plumbing had installed the new HW tank several months before for the original home owner. Jason called the City of Liberty to determine the exact code requirements. He called back and agreed to the additional work at no charge. He was able to make the changes in a timely manner. His crew called to say they would be later than planned because of an unexpected delay at the preceding job site. We appreciated his willingness to finish the installation according to code and to cover the additional materials and time. It was a great way to be welcomed into a new community. "
"He was able to quickly diagnose that the water leak from the water heater was a result of a ruptured tank, resulting in the need to replace the entire water heater."
Welcome to All State Mechanical, LLC. We are family owned and operated. We are a full-service HVAC and mechanical contractor. From St. Louis to Columbia, to Cape Girardeau to Poplar Bluff, we have you covered in Missouri. From Jerseyville to Cair, we have you covered in Illinois as well. Our workmanship and quality of service is top of the line in both residential and commercial service.
As a third-generation plumber, G.G.Greer Plumbing offers professional plumbing services to the Bonne Terre, MO area. We provide cost-effective, guaranteed workmanship that will last. We take the time to talk to our customers and ensure their satisfaction. Whether you’re looking for water heater repairs or fixture replacements, we can handle all of your plumbing needs. We can install or repair everything from sewer lines to faucets to waterlines. Our goal is to ensure we get the job done right every time. After working for his father’s company for 20 years, our founder decided to branch out on his own. You can feel confident you’re getting top-notch work and quality products at a fair price at our company. For plumbing repairs, contact us today!
Hi, This is Keith Gartner, and I have more than 30 years of experience. I look forward to personally speaking with you and making an appointment to sit down and discuss your needs.
\n
We're a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building lasting relationships and guaranteeing your satisfaction!
We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!
If you have a tank-type electric water heater, it runs regularly to keep the water at the desired temperature. If you live in a home where you don’t use much hot water, it could seem wasteful to run power to heat water that you’re using infrequently. You could save some power by using a smaller tank, insulating the tank, or lowering the temperature of the water heater.
The standard copper wire gauge to use with any 30-amp circuit is a 10-gauge wire. The National Electric Code specifies a 10-gauge wire with appliances like water heaters running on 30 amps. If you try to use a smaller gauge wire, such as a 12 gauge, with a 30-amp breaker, you run the risk of the wire overheating and melting or causing a fire. Because of the safety hazards, the gauge of the wire is not an area to try to cut costs when connecting a 30-amp breaker to a water heater.
Several things can void the warranty for your water heater. Many water heater manufacturers state that installing your own will void the warranty. However, even if you get away with performing the task yourself, incorrect installation, lack of a building permit, and improper repair work, regardless of licensing status, can all render your water heater unprotected by both the manufacturer's warranty and any installation warranties.
While a water heater explosion is rare, it is a serious danger. Be aware of these critical warning signs:
Sulfur or Rotten Egg Smell: This is a major red flag, especially for gas water heaters. It can indicate a gas leak, which could ignite and cause an explosion.
Leaking Pressure Valve: If the temperature and pressure (T&P) relief valve is leaking, it may not be able to properly regulate internal pressure, creating a risk of bursting.
Shaking or Rumbling: Loud rumbling or shaking from the tank can be a sign of extreme pressure buildup.
Excessive Heat: If the exterior of the water heater feels unusually hot to the touch, the unit may be overheating dangerously.
Rust-Colored Water: This can be a symptom of severe internal corrosion that compromises the tank's integrity.
If you notice any of these signs, especially a gas smell, you must act immediately. Shut off the gas supply to the water heater and call a professional plumber right away to prevent a potential disaster.
The right way to vent a gas water heater is to have a pipe directly upward or slopes upward out of the house. Because hot air naturally rises, this type of venting will efficiently ensure that all gas moves out of the house. Your system may rely on fans or blowers as well.
The Pilot Knob, MO homeowners’ guide to water heater services
From average costs to expert advice, get all the answers you need to get your job done.
A water heater flush costs $160 on average but can vary based on the unit size, type, labor, location, and more. Keep reading to learn how much you could pay.
Worried your water heater might freeze this winter? Learn to spot the warning signs and how to safely thaw your tank or tankless system out if necessary.
Hybrid water heaters will have you weighing high initial costs versus long-term savings. Is it the right option for you? Explore the pros and cons of hybrid water heaters.
The average lifespan of water heaters is 6 to 15 years for conventional models and up to 20 for tankless ones, but it can be less if they are not properly maintained.
