While most homeowners aren't required to tell their neighbors that they’re putting up a fence, it's certainly a good idea to do so. Not only is it considerate to give neighbors a heads up about construction noise, but building a fence may limit your neighbors' access to their own backyards while building is taking place. 

Lattice should not touch the ground, as it creates a possibility for rot and a termite infestation. It’s best to leave a gap of 3 or 4 inches at the bottom for airflow and to keep the wood dry. You can add stones, bricks, or other decorative pieces to conceal the bottom of the lattice if desired.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

There are two things you can do to make a fence replacement easier—but keep in mind that easier doesn’t mean better. First, you can use a jack or some other type of machinery to pull the post out of the ground. If that’s not available, a digging bar can help.

Second, you can backfill the hole with gravel rather than creating a concrete footing. Keep in mind, gravel is less secure. You should only use it if you’re installing a lightweight fence or have heavier, clay soil.