Billy Owens is an Industrial Controls graduate from JCCC, has a masters in mechanical & founded our heating & cooling business in May of 2006. After working in the controls industry for 18 years Billy spent some time planning and constructing his own business. He was so enthralled with the process and end result that he decided to do heating & cooling full time. Since then Billy has provided residential, commercial and refrigeration services.\n\nWe professionally install, service and repair HVAC systems. Give us a call today.
"Everything went really smoothly. The acrylic product they use is of high quality. We had some concerns about our tub walls being a little spongy due to water demand, but they reinforced everything. The job was done in one day as promised. The end result as far as appearance exceed my expectations."
"We bought a house recently. The inspection report called for installation of an expansion tank and lengthened drip leg on the HW heater. Jamison Plumbing had installed the new HW tank several months before for the original home owner. Jason called the City of Liberty to determine the exact code requirements. He called back and agreed to the additional work at no charge. He was able to make the changes in a timely manner. His crew called to say they would be later than planned because of an unexpected delay at the preceding job site. We appreciated his willingness to finish the installation according to code and to cover the additional materials and time. It was a great way to be welcomed into a new community. "
"He was able to quickly diagnose that the water leak from the water heater was a result of a ruptured tank, resulting in the need to replace the entire water heater."
Thank you for finding BNB Handyman Service here on Angi! I will work with your directly from estimate to completion offering services for estate grounds keeping and home maintenance. I respond to calls and texts by order of appearance and offer labor warranties on all completed work. I appreciate any time spent leaving a review and referrals to friends & family. I will do same day service and offer competitive rates for routine clients. I look forward to discussing your next project and thank you for your interest in BNB Handyman Services!
We are a locally owned and operated company, with over 10 years of industry experience. We value honesty and integrity, in all aspects of our business. We offer a variety of home improvement services, that are customizable to each individual project. We specialize in handyman and painting work and a variety of related service and repair projects. We pride ourselves on the quality of our work, as well as our commitment to outstanding results. We look forward to building lasting
We're a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building lasting relationships and guaranteeing your satisfaction!
BKS proudly serves its customers with pride, integrity and attention to the details that matter most to you. These are the things that set us apart from the rest. We are locally owned and operated. Give us a call today!
\n
Unless they are connected to the same system, boilers and water heaters will both need their own expansion tanks. The only case they wouldn’t have separate expansion tanks is if the boiler is pulling double duty and managing a heating system while also supplying hot water for a home. In which case, you may not need a hot water heater.
Installing a water heater without a permit can result in high fines—as much as hundreds of dollars per day, in some areas. It can also void your homeowners' insurance and cause problems when selling your home because it violates local building codes and safety regulations.
The chemicals in a water softener can wear down the anode rod in the heater and shorten its life span. However, for most people, the benefits of the softener outweigh this potential drawback.
Have a plumber inspect the anode rod annually for damage, as replacing the anode rod is far less expensive than replacing the entire water heater.
If your water heater is about to celebrate the big 2-0, you may want to consider sending it off to greener pastures. While the water heater may seem to be working well, any conventional, tanked water heater over 10 years of age is at risk of failure. If your water heater is 20 years or older, your best move is to replace your aging heater before it completely breaks down.
Most standard residential water heaters, which are typically around 40 gallons and use 240 volts and between 3,500 and 5,500 watts, require a 30-amp, two-pole circuit breaker. For smaller, point-of-use water heaters using 120 volts and between 1,500 and 3,000 watts, a 30-amp breaker is also often adequate. However, some models may have different needs; units that use more watts than average may require a 40-amp breaker, while smaller units might only need a 20-amp breaker. Newer, tankless, or more energy-efficient models can also require a higher amperage. Having the correct breaker size is crucial for safe and efficient operation, so it's best to consult a licensed electrician to determine the specific needs of your water heater.
The Ellsinore, MO homeowners’ guide to water heater services
From average costs to expert advice, get all the answers you need to get your job done.
A water heater flush costs $160 on average but can vary based on the unit size, type, labor, location, and more. Keep reading to learn how much you could pay.
Worried your water heater might freeze this winter? Learn to spot the warning signs and how to safely thaw your tank or tankless system out if necessary.
Hybrid water heaters will have you weighing high initial costs versus long-term savings. Is it the right option for you? Explore the pros and cons of hybrid water heaters.
The average lifespan of water heaters is 6 to 15 years for conventional models and up to 20 for tankless ones, but it can be less if they are not properly maintained.
