Get matched with top garage door pros in Berkeley, MO

No, there should not be a gap between your garage door and the floor. Gaps can make your garage less energy efficient, leading to higher energy bills. They also create an entry point for pests like rodents and insects, as well as rain and melted snow, which can lead to foundation damage or mold issues.

If you have a gap under your garage door, potential causes include an uneven garage floor or worn-out weather stripping. To fix it, you can try several solutions:

• Replace the weather stripping: The seal at the bottom of the door may need to be replaced.

• Adjust the garage door: You may be able to adjust the closing position on your garage door opener to eliminate the gap.

• Inspect the floor: If the concrete floor has shifted or is uneven, it may need to be repaired to create a level surface.

If these solutions do not resolve the issue, it is best to call a garage door repair specialist to inspect the door and floor.

Wood, steel, fiberglass, and aluminum are among the top building materials for a garage. Wood is highly customizable, naturally insulative, and durable in mild climates but can be expensive. Steel is lightweight, low-maintenance, and cost-effective, but it’s susceptible to rust. Fiberglass is low-maintenance and doesn’t shrink or expand in changing temperatures, but it can become brittle and crack from prolonged high winds and sun exposure.

Unlike steel, aluminum isn’t susceptible to rust and is low-maintenance, but its ultra-light weight makes it less durable than some materials, and it’s susceptible to saltwater damage, making it a poor choice for coastal homes.

During a garage door tune-up, a pro will check and adjust your door’s components, looking for any damage and loose cables, springs, or rollers. The pro will also lubricate moving parts, like the hinges and rollers, and likely tighten some screws and bolts. They’ll also adjust the door opener’s tension and alignment to make sure it’s level. Finally, they’ll wash the door to ensure it’s clean, and test the auto-reverse mechanism to make sure it’s working as it should.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.