Get matched with top backsplash installation pros in Lyle, MN

Lyle homeowners rate backsplash installation pros in our network

4.2

(14 reviews)

Top-rated backsplash installation pros.

Need a pro for your backsplash installation project in Lyle, MN?

Select your specific project to find the pro for you.
Backsplash Installation questions, answered by experts

You cannot tile directly over hot mop waterproofing because tile requires a smooth, solid surface to adhere properly. Additionally, the shower bed pan needs to be raised and sloped toward the drain to prevent water from pooling. However, you can hot mop and apply a sloped mortar bed over the top (to which the tile can then be adhered). 

Tiles last for around 100 years or more. Tiles on backsplashes can last even longer since they’re less likely to crack under foot traffic or from accidental drops, but even tile in high-traffic flooring can last a century or more with proper installation and upkeep. Porcelain tiles are denser and stronger than standard ceramic tiles, so they’ll last longer, often pushing past the 100-year mark.

If you’re looking for a durable tile for a shower floor, consider porcelain, stone, or vinyl tiles. Each of these options, when installed correctly, will stand up well to everything from water and moisture to the impact from a dropped bottle of body wash. These materials are also easy to clean and maintain, making them popular options for shower floors.

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward. 

Using caulk is one of the simplest and most recommended methods to finish glass tile edges. It creates an elegant seam between the glass tile and the adjacent area, along with a waterproof seal. With this method, you want to use a caulk color that matches the grout and, along with the grout, compliments the tile. Make sure the caulk line is smooth and even. Alternatively, you can use a bullnose or tile trimming to edge, however, that will also require caulk to seal.