Get matched with top locksmiths in Lafayette, MN

A deadbolt differs from a regular lock in its design, construction, and security level. Regular locks are typically used for interior doors, such as for bedrooms and bathrooms, and provide minimal security. They are easy to install and use, often featuring a simple locking mechanism on the inside. In contrast, a deadbolt is one of the most secure locks you can install on an exterior door. Its internal construction is designed to withstand significant force, adding a crucial layer of security that can deter intruders. While deadbolts may be more expensive and complicated to install, they are cost-effective for the security they provide and are built to hold up to wear and tear.

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

One of the best tools for removing a stripped bolt is a handy pair of locking pliers. Locking pliers can usually grip onto screws with a broken, rounded, or stripped head and lock in place so that you can loosen even the most stubborn bolt that would otherwise remain hopelessly jammed.