Top-rated electricians.

Get matched with top electricians in Deerwood, MN

Enter your zip and get matched with up to 5 pros

Need a pro for your electrical service project in Deerwood, MN?

Select your specific project to find the pro for you.

TRUSTED BY DEERWOOD, MN HOMEOWNERS

  • Average homeowner rating star icon4.7
    Average homeowner rating
  • Verified reviews icon55
    Verified electrical services reviews

Find Electricians in Deerwood

Avatar for Halle Electric LLC
Halle Electric LLC
5.0(
16
)

Serving Deerwood, MN and surrounding areas

Approved

In business since 2012

Free estimates

Warranties offered

Hello, I am pleased to introduce Halle Electric, a family-owned electrical company newly established in the Ogilvie area, boasting 14 years of electrical expertise. We are Licensed, Bonded and Insured and our family is thrilled to have the opportunity to provide affordable electrical services to our surrounding communities. To request an estimate, please do not hesitate to contact us via call or text. We look forward to hearing from you. Our contact number is 320-245-7216.

Service upgrade
Service upgrade
Service upgrade
Service upgrade
Solar work

+18

1 neighbors recently requested a quote
Avatar for Aquarius Home Services
Aquarius Home Services
4.6(
260
)

Serving Deerwood, MN and surrounding areas

Approved

Super Service Award Winner

In business since 1987

Free estimates

Emergency services offered

"It went extremely well; better than my expectations since I have a tendency to be skeptical about making sizable investments regarding equipment with which I am not fully familiar. Eric actually showed me what was wrong. He tested my water with a "portable lab" system, but then we went down to the basement and he literally took my softer apart and showed me the condition of the media beads - which instead of being a golden color, were coated black. He also showed me that about two cubic feet of media was missing! He checked the setting of the unit, and showed what they were versus what they should have been. Finally he showed me how difficult it was to turn the control dial which a small motor must do to cycle the unit through the flushing cycle. By the end of his visit, I was convinced I had a real problem. Eric gave me all the options, including the features and benefits of each. Even though he said I could have the unit reconditioned and have a warranty (shorter than on a new unit) on its performance, I opted for a new unit with the longer warranty and electricity free operation."
Additional Photos
Additional Photos
Additional Photos
Our Team
6 neighbors recently requested a quote
Recommended by91%of homeowners
Avatar for Northern Air Plumbing & Heating, LLC
Northern Air Plumbing & Heating, LLC
3.3(
21
)

Serving Deerwood, MN and surrounding areas

Approved

In business since 1998

Free estimates

Credit card accepted

Northern Air Plumbing and Heating is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities and to provide our employees with a great place to work. We look forward to working with you!

Response time1 day
28 neighbors recently requested a quote
Recommended by75%of homeowners
Avatar for Cameron
Cameron
4.3(
2,055
)

Serving Deerwood, MN and surrounding areas

In business since 2001

Free estimates

Emergency services offered

"Paul showed up about 2 hrs. a head of schedule. He called but I had not gotten to my voicemail yet. I didn't mind him showing up early but I could see how this might bother other people if they didn't give him the ok to come early. He had an apprentice with him (name I cannot remember). I showed him what was needed. We sat down and he went over that he would be giving my house an electric "checkup" first then within that, come up with an estimate for the actual work I called them for. The thing that bothered me is that him and the apprentice, after walking around the house for the electrical checkup, both sat at my kitchen table as I was in my office within ear shot of them. I heard them random talking (not talking about the actual work because there was laughing) for about 20-30 minutes, like they were at their own home visiting. Finally after I walked into the kitchen a couple times, Paul came and we did a walk through on what he found in the electrical checkup and the actual estimate for the work I originally called them out for. Then we sat down and he showed me the 3 estimates he came up with. For the electrical checkup, $11,700+, then another estimate of $4800+ (partial work that was listed for the $11,700 estimate) then the actual estimate for what I wanted done $198. Not to hard of which one I went with. I said the last estimate and they did the work right away. Now the next thing has nothing to do with the work done or the workers themselves, but when it came to pay them I had to roll my eyes at the company, Boy's Airtech, and how the try and make it look like you are getting a deal when you are not. Now get this, I am a Comfort Club Member so with that I get a 10% discount on work, plus if I have work done, I don't have to pay the service call of $79 (but understand, I pay $20/month for the membership). So Paul went over the bill with me and with the 10% discount I got $19.80 cents off of the bill......but wait, there is a charge called a TFS charge on the bill that is $14.75. I asked Paul what that was and he really wasn't sure, he indicated it was like a fuel charge or something like that. I looked all over the invoice paper, back and front to see if they say what the TFS charge was, there was none. Soooo...that "10%" discount now just became only a $5.05 discount. The total work they did was disconnect the electrical cord from the fireplace insert, thread it through the hole in the fireplace that was already there from the insert that was removed already and reconnect the cord to the fireplace insert. About 20-25 minutes of work. Even though I checked that I would rehire them again....I wanted to leave that blank but it would not let me so I just checked yes because I am a member, but I am really not sure."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by83%of homeowners
Showing 1-10 of 39
Electrical questions, answered by experts

Smart light switches are designed to be compatible with most lights and traditional home wiring, but there are several key factors to check. First, verify your home's wiring, as some smart switches require a neutral wire to operate, which may not be present in older houses (often built before 1985). Always check the wiring requirements for the specific model you choose. Second, consider your light bulbs; while smart switches work with almost any light, using a dimming feature requires dimmable bulbs, such as dimmable LEDs. Finally, ensure you have the necessary network connection. Most smart switches need a Wi-Fi connection for remote control, but some older models might use other standards like ZigBee, which would require a compatible hub.

Yes, you can get shocked while using a multimeter if:

  • You touch the metal tip while testing a live current.

  • The meter isn’t properly rated for the voltage.

  • The meter picks up on transient voltage that’s above the range you’ve set.

  • The meter has defective parts.

You can prevent shock and personal injury by using a multimeter properly and maintaining your device. 

If you’re unsure how to use a multimeter or want help with your project, contact a local electrician to get the job done.

You may not always need to hire a local electrician to install a doorbell camera. Wireless doorbell cameras, for instance, are simple enough for the average homeowner to install. They easily attach to your threshold and run on batteries, so no wiring is necessary.

However, wired doorbells with cameras likely require electrical work that should only be attempted by licensed electricians. You’ll need to call a pro if you’re working with a wired doorbell camera.

You can plug your electric car into a regular 120-volt household outlet only if you’re using a Level 1 charger. This method is slower and may take several days to fully charge your EV. For faster charging, you’ll need a Level 2 charger, which requires a 220- or 240-volt outlet.

To fix a tripped light switch, locate your home's electrical panel and identify the tripped circuit breaker. It will be in the "off" or neutral position. Flip the breaker entirely to the "off" position, then switch it back to the "on" position. If the breaker trips again immediately, there may be a short circuit or overload in the system, requiring further investigation. If the switch still doesn't work after resetting the breaker, check for loose wires or faulty components in the switch itself. It is always best to consult a licensed electrician for persistent issues and when in doubt.

The Deerwood, MN homeowners’ guide to electrical services

From average costs to expert advice, get all the answers you need to get your job done.