Get matched with top roofers in Biwabik, MN

While the terms are often used interchangeably, wood shakes and wood shingles have notable differences, primarily in their manufacturing and appearance. Wood shingles are machine-cut on both sides, resulting in a smooth, thin, and uniform product. In contrast, wood shakes are typically hand-split or sawed on only one side, giving them a more textured, natural, and rustic appearance. Due to these manufacturing differences, shakes are generally thicker, heavier, and less uniform than shingles. They are also more expensive. Homeowners seeking a more rustic aesthetic often choose shakes, while those preferring a more uniform look may opt for shingles. Both are installed in an overlapping pattern to create a durable, weather-resistant roof.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Your chimney needs a structurally sound chimney cap, protective lining, damper, chimney flashing, and brick and mortar to prevent water from goind down your chimney. A pro can help you identify where the issue is so that you can stop water from coming down the smoke shaft, through your damper, and into your home.

Condensation can occur on the inside of a roof, but it should always be temporary. It does not necessarily mean there is a roof leak. Condensation happens when the inside and outside of a house are at different temperatures. For instance, if it is hot during the day and then gets very cold at night, the inside of the house will be warmer than the outside and may cause condensation to form on the inside of the attic. This may not be cause for concern, but if it is happening frequently, it should be addressed; otherwise, it could cause roof leaks, compromise the structural integrity of the wood, or allow mold to grow.