Best fireplace pros near Newberry, MI

The answer can vary widely based on a home's age and design. As with any type of remodeling project, assume that every structure is load-bearing until confirming otherwise with a structural engineer. Almost all modern homes have chimneys that are fully independent from the rest of the home's framing. As a result, they don't bear any load beyond their own weight. However, many historic homes built prior to the 1900s contain load-bearing chimneys that tie into the surrounding roof and floor joists. If possible, use a home's blueprints or look for chimney connections that indicate load-bearing qualities to get your answer.

For most brick cleaning jobs, including fireplace bricks, use a masonry sponge and a gentle cleaner. A simple solution of equal parts water and vinegar, or a few drops of dish soap in a bowl of water, can effectively remove grime. For tougher stains, you can use a dedicated masonry or fireplace cleaner. It is crucial to wet the bricks thoroughly with water before applying any cleaning solution to prevent the brick from absorbing it, and to rinse the surface completely afterward. Harsher cleaners containing bleach or ammonia should only be used as a last resort, and they should never be mixed together.

In most cases, you should not put a TV on a fireplace mantel. The minimum width required to put a TV safely on a shelf or mantel is 10 inches, but pre-made mantels are usually too shallow, averaging at only seven inches deep. If you do choose to place a TV above a mantel, it should be mounted to the wall. However, do so cautiously as heat radiating from the fireplace could potentially cause damage to electronics.

The National Fire Protection Association (NFPA) says that chimneys and their associated elements like fireplaces, vents, or stoves should be cleaned at least once a year before the start of seasonal use. According to the Chimney Safety Institute of America, a chimney should be cleaned when there is 1/8 inch of soot buildup. If there’s more than that, creosote—a flammable byproduct of burning wood—can form and increase the risk of a chimney fire.