Get matched with top affordable plumbers in Morley, MI

If you have a huge leak like a burst pipe, it’s an emergency, and you should call a plumber immediately. Burst pipe repair costs range between $150 and $5,000, depending on the location of the pipe and the severity of the leak.

On the other hand, more minor leaks can go undetected for a while, which can cause water damage to your cabinets, walls, flooring, or ceiling. So while you don’t need to call it an emergency, you should still worry about a small leak. Get a temporary pipe leak solution in place while you wait for a plumber.

While plumber’s tape is a great solution for many plumbing problems, there are some times when it’s not the right product for the job at hand. 

You shouldn’t use plumber’s tape on pipe connections in any of the following scenarios:

• When connecting PVC pipes

• If the pipe has wide threads, as water can still leak through the space between the threads

• If the pipe has very tight threads, as the tape would prevent a proper connection

• If the pipe threads are damaged, which would prevent the tape from providing a watertight seal

If your predicament is similar to any of these, a licensed plumber can help you solve the problem.

Ever wonder what might cause your outdoor spigot to lose water flow? It's not as complicated as one might think. Something as simple as a clogged or leaky pipe could be the culprit. Some other causes are corrosion of the pipes or lack of water pressure coming from your street.

No, a larger well pressure tank will not increase or improve water pressure on its own. The pressure control on the well pump is what determines the water pressure in your home. However, a larger tank does offer other benefits. It can hold more water, allowing you to run it for longer before the pump needs to turn on. Because the pump cycles on and off less frequently, there is less stress and wear on the well system. This can lead to a longer lifespan for the pump and tank, and you may experience fewer pump-related issues that could affect your water pressure in the long run.

If you want to increase your water pressure, you can try one of the following solutions:

• Adjust the tank’s pressure settings to a higher PSI (pounds per square inch).

• Replace your current pump with one that has a higher flow rate (GPM).

• Install a water pressure booster pump in your plumbing system.

• For pressure fluctuations, consider replacing your current setup with a constant pressure system.