Get matched with top countertop and backsplash pros in Dafter, MI

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

You can make laminate counters look like marble by following the steps above. However, the condition of the laminate may limit the final results. For example, if the laminate is splitting at the corners or has sharp edges, the epoxy may not work or mimic natural marble as well.

Caesarstone® offers both quartz and porcelain counters, which are types of engineered stone countertops. Generally, you can expect to pay $50 to $200 per square foot for quartz countertops. If you decide to go with Caesarstone® quartz counters, then you’ll pay $75 to $125 per square foot, which is in the mid-range of what most quartz manufacturers charge.

Additionally, Caesarstone® is typically less expensive than quartzite, which is a natural quartz countertop that costs $80 to $220 per square foot. Depending on the Caesarstone® countertop you choose, you may spend significantly more on quartzite counters.

When installing an undermount kitchen sink in a granite countertop, use 100% silicone to secure the basin. If you’re worried your sink is too heavy, speak with a countertop professional about how to adhere the sink to the countertop without worrying about issues down the road. Sagging undermount sinks can be a common plumbing problem if they’re not properly adhered, so always make sure you’re using a high-quality material.