Get matched with top countertop and backsplash pros in Curtis, MI

The best way to protect your quartz countertops is to keep them clean. Promptly wipe any spills and clean with a damp cloth and dish soap as needed. Doing a deeper clean weekly is also recommended. To do this, move small appliances and fruit bowls out of the way and wash the entire surface with a squirt of dish soap on a damp cloth.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Concrete and granite are both extremely durable materials. One isn’t necessarily better than the other. It depends on what you’re looking for. That said, granite is less costly and requires less maintenance. Furthermore, concrete is more prone to staining and cracking, though you can patch the cracks using a concrete patching compound.