Top-rated stucco pros.

Get matched with top stucco pros in Curtis, MI

Enter your zip and get matched with up to 5 pros

Need a pro for your stucco service project in Curtis, MI?

Select your specific project to find the pro for you.

Find Stucco pros in Curtis

Stucco questions, answered by experts

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

Solid, unpainted stucco shouldn’t suffer damage from dots of glue used for this task. If the stucco is dirty, you may notice slight marks when you heat and peel the glue away, but these aren’t permanent.

However, not all stucco walls are solid stucco. Some are “faux” stucco with a foam backing. This kind of stucco veneer is more susceptible to damage, including damage from hot glue. We don’t suggest attaching anything to these kinds of stucco walls, so make sure you check the stucco type before starting this project.

The best tape that works on stucco is the kind made explicitly for stucco surfaces. Look for tape that specifies stucco, masonry, or cement installations. The adhesive usually needs to be thicker and more durable to remain stuck to these rough surfaces.

Neutral colors like white, tan, beige, and light brown are the most popular stucco colors. Natural stucco has a grayish color due to the high concentration of Portland cement in the material, but most homeowners have their contractors add pigments to create a more inviting appearance. Stucco is most popular in hotter climates, where it provides ample insulation to regulate interior temperatures and keep the solar heat out. Since lighter colors reflect more sunlight, lighter stucco is more prevalent.

Yes, you can screw directly into stucco. Only do so if the item you are installing is a permanent fixture. Drill a pilot hole into the stucco using a masonry or concrete bit, then drive in the screw with a power drill or screwdriver.

The Curtis, MI homeowners’ guide to stucco services

From average costs to expert advice, get all the answers you need to get your job done.