Get matched with top fencing pros in Curtis, MI

Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. Building permits for wrought iron fencing typically cost between $150 and $500, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you’re installing wrought iron fencing on your property line. This type of survey can cost around $500, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.

There are many types of wood fencing that you can choose from. For split rail fencing, the most common wood types are cedar, pine, black locust, and chestnut. The best wood for you will depend on if you like the way a certain wood looks and the availability of the wood type in your area.

Most of the wood types you can find at your local home improvement store are good choices since they all have rot-resistant properties or are pressure-treated with pesticides. If none of the wood options speak to the look you’re going for, check out vinyl fencing.

You should stain both sides of your fence to get the full benefits. Fences often fall along property lines, so you may want to save a buck by leaving your neighbor’s side in the dust. If you do that, all you get is a slightly better view. Moisture and UV rays can still sneak in through the side that’s unpainted or worn down and damage your fence. Rot and rust will spread, even if you can’t see it from your side of the lawn.

Yes, you can use a floor jack to remove fence posts. Attach a stem to the base of the fence post so you can position the floor jack underneath. The stem can be a scrap piece of wood attached with nails or a sturdy nail itself. Put the jack beneath the stem and push the lever to lift up on the fence post and remove it from the ground.