Get matched with top masons in Adrian, MI

When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.

Brick stain doesn’t peel or chip and is much more durable than painting. That’s because the staining is absorbed into the brick instead of lingering on the surface as paint does. The color retains even under extreme weather conditions. Therefore, brick stain will save you a lot of time and cost on maintenance in the long run.

Yes, it is usually possible to repair a damaged brick mailbox. A professional brick mason or masonry contractor can perform the repairs. They can assess the damage, provide an estimate, and help you determine if the repair is worthwhile based on the mailbox's value and the extent of the damage. The repair process may involve sourcing replacement bricks and mortar. Damaged bricks can be cut out and replaced, or the mortar joints can be cut out and retucked. It's important to note that the new mortar may differ in color from the original. If the mailbox insert itself is damaged, it can typically be cut out and replaced as well. If your brick mailbox has been completely destroyed, you should check with your local building code enforcement office before rebuilding, as some areas do not allow brick mailboxes due to the potential hazard they pose to drivers.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.