"I just pay $75 you never know who's going to come out. They do everything electrical. Just about everything is covered except the septic tank. I had an air conditioner replaced. It went great, all I had to do was pay for the freon. He didn't charge e more than what was needed."
"My existing hot water heater (12 years old) would not relight and had exhibited signs of tank failure (some discolored water and slight leak). I contacted a few vendors and NE Renovations met my budget and schedule constraints. I made the initial call the evening of December 28 and received a quick response from Richard Froais. The site survey and quote were received on December 29 with the installation taking place December 30 morning.
The installation crew, Jim and Randy, were punctual, courteous and thorough, and cleaned up the site well. It was a pleasure to work with them and NE Renovations.
Of particular note, my previous installation had some errors in the piping which were not apparent until a few years later. I related these symptoms to Richard and Jim who figured out the situation and agreed that it could be fixed as the new tank was installed. This I expect will create better operating conditions and longer life."
We bring old-world, quality craftsmanship to every unique project we take on. We specialize in a variety of major home improvement projects to include additions, kitchen and bathroom remodels, major renovations and home repairs. We work efficiently with our resources to ensure your project is completed on time and on budget. We're licensed and insured & look forward to building strong, long-lasting relationships with our clients and guarantee your satisfaction.
Friendly Odd Jobs is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities and to provide our employees with a great place to work. We look forward to working with you!
While you can drain water softener backwash into a septic tank, doing so may cause several problems. One problem is that increased sodium chloride levels from water softener backwash can kill septic tank bacteria, decreasing the effectiveness of this wastewater treatment system. Another issue is that large calcium deposits can eventually stop up the drain field and lead to poor drainage.
The easiest thing you can do to prolong the life of your septic system is to adopt septic-safe practices. This includes not flushing non-biodegradable items, chemicals, or excessive grease down drains and scheduling regular septic tank pumping to prevent buildup. It’s also important to fix plumbing leaks promptly and to practice water conservation to avoid overloading the system. To maintain your drain field, avoid heavy vehicle traffic and plant shallow-rooted vegetation in the area. Most importantly, invest in routine inspections and maintenance to detect and address issues early.
If your septic tank is still within its expected lifespan and you need to relocate it on your property, it's possible to do so. However, because the task is so labor-intensive and costly, most homeowners simply choose to abandon the old tank if possible and install a new system in the new location. In either case, hiring a professional installation company will be necessary for the job.
Common signs that your well pump is failing include fluctuating or consistently poor water pressure, sputtering water from faucets, or a complete loss of water. Other indicators are unusual noises coming from the pump, the pump running continuously, dirty or cloudy water, or a sudden, unexplained spike in your utility bills. While some issues, especially after a power outage, might be resolved by simply restarting the power or priming the pump, persistent problems suggest a more serious issue. If you notice any of these red flags, it is recommended to call a professional well pump service to inspect the system and determine whether it needs to be repaired or replaced.
The pressure in a well pressure tank should be set 2 to 3 PSI below the pump's cut-on pressure. The cut-on pressure is the lower number in the pressure setting (e.g., the '30' in 30/50 PSI) and is the point at which the pump starts. The cut-out pressure is the higher number, where the pump stops.
For example:
If your pressure switch is set to 30/50 PSI, the tank pressure should be 27-28 PSI.
If your pressure switch is set to 40/60 PSI, the tank pressure should be 38 PSI.
Common pressure settings for household applications include 20/40, 30/50, and 40/60 PSI. The difference between the cut-on and cut-out pressure is typically 20 PSI.
The Limestone, ME homeowners’ guide to septic tank services
From average costs to expert advice, get all the answers you need to get your job done.
Caring for your septic system is crucial to ensuring its long life. But how much does it cost to pump a septic tank? We explore the different cost factors.
A damaged septic system can leak odors and sewage, so repairs are urgent. Find out how much septic tank repair costs based on repair type, tank size, and more.
Septic tank risers make it easy to access your septic tank when it’s time for routine inspection, maintenance, and pumping, saving you precious time and labor costs.
Septic tank sizes vary depending on the size of your home, how many people live there, how much water you use, and more. Read on to learn how to determine the right size for you.
