Get matched with top plumbers in Georgetown, ME

A handyperson with basic plumbing experience can install a bathroom faucet, like the kind of skills you’d need to replace a P-trap or swap out a showerhead. They may not have deep knowledge of local plumbing code, though. If your faucet installation requires work on the pipes behind the wall or under the floor, hire a licensed plumber with the necessary training and licensing. 

To measure pipe size, you can use a ruler, a soft tape measure, or a caliper. You can find a special pipe caliper that has iron or copper pipe sizes already marked. Rulers work if the end of the pipe is exposed. If your pipe is still attached to the plumbing, you’ll need to go for a soft tape measure or caliper.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

No, a larger well pressure tank will not increase or improve water pressure on its own. The pressure control on the well pump is what determines the water pressure in your home. However, a larger tank does offer other benefits. It can hold more water, allowing you to run it for longer before the pump needs to turn on. Because the pump cycles on and off less frequently, there is less stress and wear on the well system. This can lead to a longer lifespan for the pump and tank, and you may experience fewer pump-related issues that could affect your water pressure in the long run.

If you want to increase your water pressure, you can try one of the following solutions:

• Adjust the tank’s pressure settings to a higher PSI (pounds per square inch).

• Replace your current pump with one that has a higher flow rate (GPM).

• Install a water pressure booster pump in your plumbing system.

• For pressure fluctuations, consider replacing your current setup with a constant pressure system.