"We had insulation installed a week earlier by Koala. During the insulation, Jasper (insulator) suggested another area that we might consider installing blown-in insulation. We agreed and the second job was performed on Friday, the 24th. Jasper and Richard were on time, the insulation project was well done and they left the area very clean. Would use them again."
"We are extremely satisfied with the whole process of our house being insulated. First we had the walls done, and then a couple weeks later we had our attic insulated. The crew were so nice, friendly, and knowledgeable. We are very satisfied with everything. Thank you, everyone."
"We called Mister Insulation and Jeff came out in a day or so. We explained that we purchased new windows and doors and had insulation blowen into the walls but the house was still not warm.
He took pictures in the attic and used a thermal camera to show where we were losing heat also we had mold. He removed the mold and replaced the insulation . He and his crew were very professional. We would recommend them ."
"We had a great experience with ROI Construction sales representative David Burke. David was very knowledgeable about ROI's porducts and services. We look forward to getting our attic insulation project completed and will provide a more thorough review at that time. Thanks, Tim"
"Brian came out to perform an energy audit on my home. He arrived on time, was respectful of my home and showed me where my insulation was missing with his infrared camera! His report came two days later as promised with a reasonable quote."
"Debbie showed up on time and seemed knowledgable about insulation. However she had a hard time answering my questions because she was overly fixated on price. That's not necessarily a bad thing but it got in the way of me really understanding the answers. When the quote came in it was very resonable but when i emailed with a follow-up question concerning warranties, the lack of record on Angies List (despite being in biz for 100+ yrs) and a sub-contractor she was going to use for an exhaust ventilation, she wouldn't put some of the answers in writing until after I committed to using her company. After reviewing all of the quotes we received we finally decided to take a leap of faith because she seemed knowledgable and the quote was fair. i emailed saying we wanted to move forward and asked if i could i now get the informatoin i requested in writing. Unfortunately it's now been 5 days so we are moving in another direction. I bet the company does quality work but it won't be with us. "
"Very professional, on time, great communication, thorough examination of my home. This is an absolute requirement for any home owner. The equipment they provide (LED lights, low flow equipment, pipe insulation) is well worth the fee to have the audit conducted."
Yes, you can apply new plaster over an existing plaster surface, such as a wall or ceiling, provided the old plaster is in good condition. Before you begin, check the stability of the existing plaster. The surface must be clean, free of loose material, and have no peeling paint. It is also recommended to roughen the surface slightly to promote adhesion. For older plaster, applying a base coat like a PVA emulsion or a specific bonding agent or primer is crucial. This step makes the existing plaster less porous and ensures the new and old layers adhere properly for a smooth, long-lasting finish.
While it’s most common to sand plaster dry, it is possible to wet-sand plaster, too. Doing so can reduce the amount of plaster dust released into the air and make it easier to work in smaller, more delicate areas (such as around wall trim). However, some people find that wet sanding leads to more imperfections, which is why larger walls are more often dry sanded to ensure an even finish.
Vinegar and bleach are effective options for removing mold from drywall. Vinegar is a better choice if you have a smaller mold issue while bleach is best if you have a larger mold problem. If the area you're cleaning has limited ventilation, using vinegar would be a better option. In that case, you could mix vinegar with baking soda to remove more stubborn mold growth.
It is more difficult to drywall a ceiling than it is to drywall a wall, but not so hard that DIYers can’t tackle it. One of the main issues with hanging drywall on your ceiling is getting it into place. Drywall isn’t light so, if you are hanging full drywall panels, you will need at least two (it’s better with more) people to hold the panel while you drill it into the ceiling as a single piece can weigh between 40 and 60 pounds and will need to be held in place for up to 10 minutes.
Yes, you can hammer a nail into a wall stud. But before you do, it’s important to confirm that you’re actually nailing into a stud—and not wiring, pipes, or ductwork. To check, find a few more studs in the wall, then measure to make sure they’re either 16 or 24 inches apart.
The Street, MD homeowners’ guide to drywall insulation services
From average costs to expert advice, get all the answers you need to get your job done.
New insulation makes your home more comfortable and boosts energy efficiency. Use this guide to budget for insulation installation costs in Baltimore, MD.
The cost of blown-in insulation in Baltimore, MD varies depending on the type of insulation, labor, prep work, and more. Learn more about the cost factors in this guide.
Attic insulation removal costs in Baltimore, MD, vary based on multiple factors, including why you're removing it and how easy it is to complete the task.
Learning how to insulate plaster walls can help improve your home's energy efficiency. However, there are crucial cautions to consider before attempting.
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.
Insulating your walls requires the right insulation and installation method. Keep reading to learn how to insulate a wall without removing the drywall.
