Get matched with top door pros in Perryman, MD

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.

The width of your door jamb should match your wall thickness exactly, so it depends on your wall. For standard door openings, the width is equal to the width of a 2-by-4-inch  stud, plus the width of the drywall on both sides—about 1/2 inch each—which comes out to 4 9/16 inches. Block walls and framed walls that use 2-by-6-inch framing require a door jamb that’s 6 9/16 inches. You should always measure your finished wall thickness to get an accurate width for your door jamb material.

Outswing doors are more popular for exterior doors as they offer more room for moving items in and out of a home. And because the hinges are on the outside of the door, they’re more secure against potential break-ins. But, outswing doors are more susceptible to the elements and are more expensive. Comparing inswing vs. outswing doors depends on your budget, needs, and overall preference.

While doggie doors are convenient for pet owners, they do offer a few drawbacks. For instance, they’re small enough that unwanted critters could come into the house, such as raccoons, snakes, rats, and insects.

They’re also large enough that small children can escape through them, which can be a serious concern to parents of young children.

Finally, doggie doors can make it difficult to regulate your home’s temperature because they constantly let in hot or cold outside air.