Get matched with top door pros in Walpole, MA

A screen door needs at least two hinges, though most have three or four hinges. The amount of hinges depends on the weight and size of the door. The heavier your door, the more hinges it will need for support. Exterior doors, which are sturdier than interior doors, have the most hinges.

Spacing a door is tricky since you need to leave enough of a gap for the door to move freely and not get stuck when the slab and frame contract and expand in dry and humid conditions. The ideal gap between a doorframe and slab is 1/8 of an inch. If the gap is any larger, the door will feel drafty. But if the gap is any smaller, the slab can get stuck due to weather changes.

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.

Yes, barn doors can be too heavy, although the limitation is usually imposed by the mounting hardware you buy and not your home’s framing, unless you’re building an unusually wide door. To keep the weight down, you can opt for 1-by material rather than 2-by material, and choose a softwood like pine rather than a hardwood like maple or oak. Check the weight limits on your mounting hardware, and always attach your door track to studs rather than to drywall anchors.