Best door pros near Mansfield, MA

You can use any wood to make an interior door, provided it’s the right thickness. Common options for painted doors include pine or poplar for the stiles, rails, and mullions, and paint-grade plywood for the panels. You can also opt to make your own panels out of pine or poplar if you intend on staining the door instead. Opting for oak, maple, or another hardwood is another great option for a high-end door that will last for decades, but the wood will cost significantly more.

You can use wood, metal, or plastic as a door shim, but keep in mind that wood will rot easier than the other two materials. Your local hardware store should have at least one type in stock. Alternatively, you can trim a piece of cardboard to fit underneath your door hinge and work as a temporary, makeshift door shim.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.

You can attach the hinges to either the door or the frame first, depending on your preference. The order will not affect how the door hangs or the ease of installation. However, we recommend starting with the top hinge over the bottom one for stability, as it’s much easier to support the door from below while you install the top hinge. It will also be easier to pull the door outward from the hinges as it hangs from the top than it would be to push the door toward the hinges, as there’s less clearance on the lock side.