Get matched with top door pros in Raynham, MA

Standard door sizes aren’t one-size-fits-all, but there are common go-to dimensions. For exterior doors—like your front door—36 inches wide by 80 inches tall is typical, though you’ll see 30- or 32-inch widths too, especially in older homes. Interior doors vary more. Bedrooms and bathrooms often use 30- to 32-inch widths, and closet doors can be anything from slim singles to wide bi-folds. Height is usually 80 inches across the board; however, always measure your actual opening. “Standard” only works if it matches what’s already in place.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

While entryways are seldom added to a house to increase the sale price, they are commonly constructed to increase the livability and enjoyment of a home. So, while they aren’t necessary, they do make for a more comfortable and luxurious-feeling home. Entryways are most valuable in areas of extreme heat, cold, or rain, as the space between the living area and the outdoors helps keep the outdoors outside. Plus, snow, wet boots, and mud are all corralled into one space that’s easy to clean.

Permits are required when carrying out any structural work, so in most cases, you will need a building permit to cut through a concrete block wall to install a door. If you have specific questions about your project or need to obtain a permit, contact your municipal building department or ask your contractor for advice.