Get matched with top sink installation pros in Waterproof, LA

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

The time it takes to install a sink depends on whether you hire a professional or do it yourself, as well as the complexity of the job. A professional plumber can typically install a sink in 1 to 4 hours, with most routine jobs taking around 1 to 2 hours. However, more complicated installations will take longer. Projects that involve rerouting plumbing, installing an under-mount sink, or making countertop modifications can take a full day. Installing a sink with a prefab vanity could also stretch the project to 6 to 8 hours. If you plan to install the sink yourself, you should set aside 4 to 6 hours, though it could take longer. It's also recommended to have a friend help, especially if you are working with a heavy sink made of a material like porcelain.

If you have the patience and help to install a kitchen sink, you can do it yourself. This DIY project works best when replacing a sink that fits the existing hole, and the fittings and plumbing are in good condition. If you're worried about the plumbing's condition or aren't sure how to shut the water and power off to the garbage disposal and dishwasher, it's best left to a sink installation pro.