Get matched with top fencing pros in Plain Dealing, LA

To choose where to add a fence gate, know where fence gates shouldn’t go. For example, you should avoid placing gates over low spots on the ground where water can collect and form muddy puddles. Many ranchers install gates at the corner of a fence. Certain gate placements may also be required depending on the type of gate latch you use.

In most states, it is a legal requirement to have a fence around your pool to protect both swimmers and pool owners. These laws can vary by state, city, and county, so you must research the specific regulations in your area before installation. The rules may also differ for inground versus above-ground pools, with inground pools typically requiring a full fence. Additionally, most homeowners' insurance providers will require a fence around a residential pool before providing coverage. As a general rule, it's always best to have a fence for everyone's safety.

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.

Corrugated metal is a strong, long-lasting material. A corrugated metal fence will typically last several decades, and the metal panels themselves may last for 40 to 60 years. The main thing you should be concerned about is the fence posts. Wood fence posts will last about five years if you purchase them untreated or about 15 years if you treat them after installation. Keep an eye on your posts and look out for insect damage and rot.