Get matched with top snow removal pros in Montgomery, LA

Snowblowers come in three different sizes: first-, second-, and third-stage blowers. Each additional stage is larger with higher intakes, more powerful, and has more gear options.

A first-stage blower, also called a snow thrower, is usually best for snow 6 to 8 inches or below. Electric snow blowers are usually only available in this size. If you regularly get snow that’s well above six inches, consider a second-stage snow blower. If snowstorms dump 2 to 3 feet of snow repeatedly during winter, you need a third-stage snow blower to tackle it.

Heavy amounts of snow could be a problem. In many climates, lots of snow on your rooftop can lead to freeze-thaw cycle that create ice dams, which can damage rooftops. But if you’re using shingle clips, this snow poses an additional problem: As it melts and freezes, it can easily dislodge clips you’ve placed on your roof.

You can clean snow off your roof after a fresh snowfall while it’s still lightweight, but brushing off snow can also dislodge your clips. If you get a lot of snow, then roof clips become less viable.

Roof raking helps clear snowfall from your roof and, in turn, you hope that this prevents ice dams. But can roof raking actually cause them? Generally, no, it cannot. But you should note that while, in some cases, you might successfully prevent ice dams from forming near the edge of your roof by keeping it cleared with a roof rake, they could still form higher up on the roof, where you are unable to reach. This may leave you wondering: Does roof raking prevent ice dams? While it is not a 100% guaranteed way to prevent them, it does help.

While it’s less common than on other kinds of roofs, yes, ice dams can form on metal roofs. Metal roofs, particularly those with snow guards installed, can still accumulate ice at the roof edge, although ice dams on metal roofs are less likely to cause roof or interior damage than on traditional asphalt shingle roofs.