Get matched with top tv mount installation pros in LaPlace, LA

It’s highly recommended to use studs for a TV mount. The last thing you want is to be watching your favorite show when the TV falls off the wall. Studs are much stronger than drywall and quite a bit stronger than drywall anchors but, if you can’t find the studs or there simply aren’t any where you need them, you can use drywall anchors. It’s extremely important to make sure the anchors are rated for the load of the TV. We recommend using anchors that are rated far beyond the weight of whatever you’re hanging. Our suggestion is metal drywall toggle anchors. 

Choosing the right size of wall anchors is essential for a secure installation. The size of the wall anchors should match the size of the screws you plan to use. Follow the manufacturer's recommendations for the specific wall anchors you purchase. Typically, the packaging of the wall anchors will indicate the appropriate screw size and diameter for a proper fit.

The VESA mounting standard refers to the layout of the mounting holes on the back of all televisions that follow the standard. These holes appear in the same place on all TVs of a certain size. This allows the mounting bracket and hardware manufacturers to build the brackets to fit the VESA standard. Ideally, if everyone follows the VESA standard, any brand of TV should fit any brand of mounting bracket, as long as the sizes match up correctly.

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.