Get matched with top gas log pros in Empire, LA

In most cases, a gas stove should be installed by a licensed plumber. Connecting gas appliances carries many risks, chief among them a fatal gas leak. If your home is already set up with the proper gas hookups, you may be able to DIY the installation (or save money by hiring a local handyperson or basic appliance installer near you rather than a plumber). If you’re ever in doubt, however, we recommend going with a professional master plumber.

The easiest way to empty a propane tank is to simply use it until no propane remains. If you’re short on time and need a faster solution, transfer the propane to another tank instead. Wear leather gloves to protect your hands, then connect the hoses from both propane tanks and seal them tightly. Turn the knob to open the supply tank valve on the full tank and let it run until the pressure pushes all the propane into the other tank. When all propane is transferred, remove the hose and seal each tank. 

Any gas pipe can leak, especially if it’s old or isn’t properly maintained. However, even with a shovel, plastic pipes are more easily damaged by impact. That’s why it’s so important to have gas lines marked by the utility company before you begin digging for any reason. Some metal pipes, like black pipes, galvanized steel, and copper, aren’t as easily damaged by impact but can degrade over the years, leading to leaks.

The size of a pipe isn’t always the outside or inside diameter. Rather, it’s a nominal diameter that depends on the type of pipe. For male pipes, you’ll need to measure the outside diameter. For female pipes, you’ll need to measure the inside diameter. You’ll then need to use a nominal diameter conversion chart to get the actual pipe size you’d buy in the store.